सीधे मुख्य सामग्री पर जाएं

Tyre Wear, Defects and Contributing Factors

 Tyre Wear, Defects and Contributing Factors
Types of tyres wear:-
  1. One Side Wear
  2. Shoulder Wear
  3. Center Wear
  4. Feather Edge Wear
  5. Heel and Toe
  6. River Wear or Erosion Wear
  7. Diagonal Spotty Wear
  8. Depression Wear
  9. Cupping Wear
  10. Brake Skid or Flat Spot Wear

टिप्पणियाँ

एक टिप्पणी भेजें

इस ब्लॉग से लोकप्रिय पोस्ट

Tyre Mismatching

 Tyre Mismatching Tyres mismatching is a most important consideration factor because if two mismatch Tyres mount on same axle then Tyres life decreases 50%. Now i tell all about Tyres mismatching. Types of Mismatches Tyre pattern Tyre Construction Size Air Pressure Non-Skid Dept 1.  Tyre pattern  When we mount in a single hub a block pattern, and another is rib pattern type. In this way, this type of fitment called mismatching which is known as pattern mismatch. This type of fitment is not acceptable in single hub or multiple hubs. Pattern should  use: - 1.Lug to Lug 2.Rib to Rib 3.Block to Block 4.Rib Block  to  Rib Block 2. Tyre construction  When a nylon and radial tires are fitted in the same hub, the mismatch is called construction match. Construction should  use: - 10.00R20 to 10.00R20 295/90R20 to 295/90R20 Because both tires construction is different from each other. 295/90R 20: - 295 is section width and 90 is the aspect...
एक टिप्पणी भेजें
Show more »

Training Modules

 Customer Basic Requirements Tyre must fulfill the four customer requirements. 1. To carry the load Tyres always carry load just like passengers and cargo. Tyres supports the weight when vehicle in dull condition but when vehicle in motion Tyre must also resist the considerable loads shifts during acceleration and braking. A car Tyre has to carry over 50 times of its own weight, it is remembered that the part of Tyre actually carries air inside the Tyres. 2. To transmit the driving and braking forces The Tyres transmit the acceleration and braking forces to the road through footprint area. A change in inflation pressure modifies the footprint area, therefore proper air inflation is crucial for the Tyre to fulfill this function. 3. To change and maintain direction This is the steering function in which Tyres help maintain a straight line or change direction.  The Tyre must steer predictably, regardless of the road or weather conditions. The Tyre should transmit steering inputs ...
एक टिप्पणी भेजें
Show more »